Alligator® Lacing
For easy, economical installation and an exceptionally smooth joint, choose Alligator® Belt Lacing Fastener System. Available for both conveyor belts and transmission belts.
00, 1, 7, 15, 20, 25, 27, 35, 45, 55, 65
Up to 200 P.I.W. (35 kN/m)
1/16" up to 1/2" (1.6mm up to 13mm)
1" to 14" (25mm to 350mm)
|
|
Flexco® Bolt Solid Plate
Commonly used on higher-tension main-haulage belts used for highly abrasive materials such as sand, gravel, and crushed stone, as well as coal, cement, and salt.
1, 140, 190, 1-1/2, 2, 2-1/4, 2-1/2 and 3
Up to 620 P.I.W. (105 kN/m)
3/16" up to 1-3/16" (5mm up to 30mm)
12" to 48" (300mm to 1200mm)
|
Alligator® Plastic Rivet
For applications where metal belt fasteners can’t be used, the Alligator® Plastic Rivet is a long-lasting, easy-to-install solution for light-duty applications.
APF100 and APF150
Up to 65 P.I.W. (11 kN/m)
3/32" up to 1/8" (2.4mm up to 3.2mm)
1 1/2" to 3" (38mm to 75mm)
|
|
Flexco® Wedlok® Fasteners
Wedlock® splices cost substantially less than a vulcanized splice, take considerably less installation time, and can be installed by your own maintenance crews.
|
Flexco® Conveyor Belt Rip Repair
Flexco® Rip Repair Fasteners will lower your repair costs, result in zero belting waste, can be installed by on-site workers using common hand tools.
|
|
Alligator® Ready Set™ Staple
Featuring one-piece fastener strips with pre-inserted staples for easier installation, Alligator® Ready Set™ provides a strong splice that resists impact damage.
RS62, RS125 and RS187
Up to 200 P.I.W. (35 kN/m)
1/16" up to 1/4" (1.5mm up to 6.4mm)
2" to 4" (50mm to 100mm)
|
Flexco® VP™
Rubber-covered top plates are deal for highly abrasive materials such as sand, gravel and crushed stone.
140, 190 and 2
Up to 440 P.I.W. (Up to 75 kN/m)
3/16" to 13/16" (5mm to 21 mm)
14" to 30" (360mm to 760 mm)
|
|
Alligator® Rivet
Strong, easy-to-install splice for round hay baler applications.
4, 7, 10, 14
Up to 300 P.I.W. (52 kN/m)
1/8" up to 7/32" (3.2mm up to 5.6mm)
3-1/2" (88mm)
|
Flexco® SR™ Rivet Hinged
Delivers the performance, long life and easy installation that maximizes belt availability
R2, R5, R5-1/2, R6, RAR6LP, RAR8, R9
Up to 2000 P.I.W. (Up to 350 kN/m)
1/8" up to 1" (3 mm up to 25.5mm)
5" to 42" (125mm to 1050mm)
|
|
Alligator® Spiral Lace
Ideal for belt operations that require both nonmetallic fasteners and small pulley / low profile capabilities.
ASL60, ASL160, ASL90, ASL190, ASL80H
Up to 50 P.I.W. (8.7 kN/m)
1/32" up to 1/4" (0.8mm up to 6.4mm)
1/2" to 5/8" (12.7mm to 15.3mm)
|
Flexco® SR™ Rivet Hinged R9
For a strong splice, even in the most demanding high-tension or thick belt applications.
R9
Up to 2000 P.I.W. (Up to 350 kN/m)
5/8" up to 1" (16 up to 25.5 mm)
42" (1050 mm)
|
|
Alligator® V-Belt Fasteners and V-Belting
Alligator® V-Belt Fasteners are designed for use on machinery with fractional and multiple A-section V-Belt drives.
A, B, BB, C, D
|
Flexco® BR™ Rivet Solid Plate
Recommended for the most demanding high-tension applications.
BR-10 and BR-14
Up to 800 P.I.W. (140 kN/m)
7/32" up to 15/16" (6mm up to 24mm)
18" to 36" (450mm to 900mm)
|
|
Clipper® Wire Hooks
A key advantage of the Clipper® Wire Hook system is that the fasteners are machine-installed, yielding a precise, strong and smooth splice.
Unibar® Fasteners, ClipMark™ Series Fasteners and Carded Hooks
Up to 200 P.I.W. (35 kN/m)
3/64" up to 25/64" (1.2mm up to 10mm)
5/16" to 7" (24mm to 175mm)
|
Flexco® F-Series
Ideal for mining operations where a machine-applied, narrow-looped staple splice is preferred.
F9, F11, F12, F14
Up to 800 P.I.W. (140 kN/m)
7/32" up to 9/16" (6mm up to 14mm)
9" to 12" (225mm to 300mm)
|
|
Flexco® Bolt Hinged
For belts operating over smaller pulleys – such as in construction equipment and road machinery – Flexco® Bolt Hinged fasteners are strong, dependable and easy-to-install.
375X and 550
Up to 400 P.I.W. (70 kN/m)
1/4" up to 7/8" (6mm up to 22mm)
6" to 20" (150mm to 500mm)
|
|
